SparkFun Accessories Buttons are an easy tactile way to interact with your project but why deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with a built-in green LED simplifies all those worries into an easy-to-use I2C device. Utilizin

SparkFun Accessories This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only

SparkFun Accessories This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on one end with snap style receptacles for biomedical sensor pads. Each cable comes in a red/blue/black set.

SparkFun Accessories USB OTG Cable- Fem. A to Micro B - 5in

SparkFun Accessories USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor yet genius modifications that allow them to be plugged into their ports

SparkFun Accessories This is an inexpensive 3-foot-long HDMI to Micro HDMI cable that you can use to hook up your Raspberry Pi 4 and 5 to a suitable monitor or TV. Heck you can hook up anything you want with it! Micro HDMI is less common of a medium right now even more

SparkFun Accessories With the SparkFun Qwiic Connect System expanding every day we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Gravity Adapter Cable allows interoperabili

SparkFun Accessories This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the back side of the PCB. We recommend trimming the connector leads on the button side as short as possible to

SparkFun Accessories This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V.

SparkFun Accessories There are lots of trimpots out there. Some are very large some so small they require a screwdriver. Here at SparkFun we just needed a simple one that worked. This 10K trimmable potentiometer has a small knob built right in and it's breadboard frien

SparkFun Accessories Tactile Button Assortment

SparkFun Accessories Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft diffuse glow.Features:Forward Voltage (R/G/B): 2.0 / 3.2 / 3.1VForward Current: 20mAIntensity (R/G/B): 550 / 250 / 700 mcdCommon CathodeDocuments:D