SEGGER Microcontroller 6.90.00 emPower USB Host Board
Segger 6.90.00 emPower USB Host Board is a cost-effective microcontroller-based board that requires a dual USB platform in a simple and small design. This Segger emPower USB host board features a debug connector that provides full access to the NXP LPC54605J512 with Cortex® M4 core. The emPower USB host board is pre-programmed with emLoad bootloader. The USB board can also be debugged using Embebbed Studio, a J-Link, and a 9-pin Cortex-M adapter. Applications include input devices, sensors, terminals, loudspeakers, Wi-Fi, LAN, CAN, and BLUETOOTH®.
Features
- NXP LPC546 MCU (LPC54605J512) 180MHz, Arm Cortex-M4
- 180MHz Arm Cortex-M4 based core
- Floating point unit (FPU) and memory protection unit (MPU)
- 512KB on-chip flash program memory
- 160KB contiguous main SRAM
- 2.0 USB high-speed host/device controller with on-chip high-speed PHY and dedicated DMA
- 9-pin Cortex-M external debug interface
- 1x USB host full-speed providing USB supply to device (A-type receptacle)
- 1x USB micro B USB 2.0 receptacle for power only
- Configuration-free with no shorting links or solder jumpers required
- 32mm x 32mm dimensions
Applications
- Input devices
- Senors
- Terminals
- Loudspeakers
- Connectivity
- Wi-Fi
- LAN
- CAN
- BLUETOOTH
- MIDI
emPower USB Host Board Overview
Additional Resource
Videos
Published: 2019-05-20
| Updated: 2023-07-19