TDK InvenSense EV_ICU-20201-00 Evaluation Board
TDK InvenSense EV_ICU-20201-00 Evaluation Board includes the ICU-2021 ultrasonic sensor device with PCB, two capacitors, and a connector. This board requires an acoustic to interface to the IC. The EV_ICU-20201-00 is connected to the sensor via a 12-pin 0.5mm pitch Flat Flex Cable (FFC) connector. This evaluation board is used in smart door lock wake-on-approach, obstacle avoidance, wall following, parking lot sensors for vehicle counting, and ground-level measurement in drones.
Features
- Connects via 12-pin 0.5mm pitch Flat Flex Cable (FFC) connector
- Requires an acoustic to interface to the IC
Applications
- Smart door lock wake-on-approach
- Obstacle avoidance
- Wall following
- Parking lot sensors for vehicle counting
- Ground-level measurement in drones
Additional Resource
Schematic Diagram
Associated Products
TDK InvenSense EV_MOD_ICU-20201-00 Evaluation Module
Evaluates the ICU-20201 Time-of-Flight sensor and plugs into the DK-x0201 development kit.
TDK InvenSense ICU-20201 Time-of-Flight (TOF) Range Sensor
Integrates an 85kHz Piezoelectric Micromachined Ultrasonic Transducer (PMUT) with a 2nd generation.
TDK InvenSense DK-x0201 Development Kit
Designed around Atmel's SAMG55 MCU and includes an on-board embedded debugger.
Related Solutions
TDK InvenSense SmartSonic™ Time-of-Flight (ToF) Sensor Solutions
Features ultrasonic sensor platforms that provide distance measurement and presence detection.
Published: 2023-09-01
| Updated: 2024-08-20